Exterior Concrete & Retaining Walls Concrete

Concrete Services in Omaha, NE

Patios, driveways, walkways, porches, steps and slabs—concrete services planned around your property, as a standalone project or part of a larger improvement.

Request a Concrete Estimate

What We Do

Find the Right Concrete Service

Planning a deck above or beside your concrete? Explore Deck Services. For a coordinated backyard plan, visit Premium Outdoor Living.

Explore recent concrete projectsWood deck and straight stairs above a concrete patio beside a gray house.Omaha deck and concrete patio transformationProject overview: a deck and concrete patio in Omaha.Concrete patio beneath an elevated wood deck and stairs, with a low block retaining wall.patio added beneath an existing deckCompleted concrete patio added beneath a Bellevue deck.Concrete front porch with wood posts, lower steps with dark handrails and a straight sidewalk.front porch, sidewalk and lower-step projectRaised porch, replacement sidewalk and lower steps in Omaha.

Choose the work you are planning. We review access, drainage, preparation, and finish expectations before defining the scope.

Driveways →New driveway work and replacement of existing surfaces.Patios & Walkways →Outdoor gathering areas, paths, and transitions.Slabs & Flatwork →Concrete surfaces planned around their intended use.Removal & Replacement →Remove worn concrete and define the new installation.

Finished concrete patio beneath a raised wood deck and stairs

Concrete Installation Planned Around the Site

Shown here: The patio and space beneath the deck at an Omaha home. View the deck and concrete patio project →

A dependable concrete project begins before placement. The existing surface, soil and base conditions, changes in grade, drainage direction, access for materials, and nearby structures can all influence the appropriate scope.

Depending on the project, the work may include removal, excavation, grading, base preparation, forms, reinforcement, concrete placement, finishing, joints, curing, and cleanup. The written estimate should identify the work included so the homeowner can review the plan before construction begins.

Mark what the concrete needs to meet. Show the door threshold, the bottom deck step, an adjoining driveway or a gate that needs to swing over the new surface. Photos of those connections help us review finished heights, clearances and drainage before the work is priced.

What affects the cost of a concrete project?

Square footage is a starting point, but access, removal thickness, disposal, excavation, base conditions, reinforcement, finish, and transitions can change the estimate. Two patios of the same size can require different preparation. Share approximate dimensions and photos, and ask the proposal to distinguish the planned work from conditions that cannot yet be confirmed.

Concrete patio beneath a raised deck beside a short block retaining wall.

Driveways, Patios, Walkways, and Concrete Slabs

Concrete can create durable, useful surfaces for vehicle access, outdoor living, foot traffic, equipment, and other property needs. Common projects include driveways, patios, walkways, steps, and slabs sized for the intended use and available space.

The layout and finish should support both function and appearance. Finish options depend on the project scope and may range from a straightforward surface to a decorative treatment. We review the requested look, transitions, edges, and adjoining surfaces before the final scope is approved.

For a business or managed property, see our commercial concrete services, including walks, entrances and small pads.

Concrete Driveways

Plan vehicle access, garage transitions, drainage, and any removal of the existing driveway before defining the replacement area.

Concrete Patios & Walkways

Consider outdoor seating, walking routes, steps, adjoining landscaping, and the direction water will drain. If a deck, pergola or additional path is part of the longer-term plan, include it in the site review before the patio layout is finalized. Explore our outdoor living services to plan these connected improvements together.

Slabs & Flatwork

Share the intended use, approximate dimensions, access, and expected loads so the proposed scope can account for the site.

Retaining Walls & Adjoining Concrete

Plan a retaining wall alongside the patio, walkway, steps or driveway it supports. Share the approximate wall height and length, slope, access and nearby structures. We review excavation, base preparation, drainage, wall materials and how the finished grades meet the adjoining concrete before defining the scope. Required design, permits and inspections depend on the site and proposed wall.

See the Bellevue deck, patio and retaining-wall project for an example of connected outdoor work.

Driveways and parking areas. Show where vehicles turn, park and meet the street or existing pavement. Mark the removal limits and where water collects. Ask how preparation, placement and finish edges will be included.

Patios, walks and equipment pads. For a patio, show doors, stairs and surrounding grades. For a walkway, mark the route and steps or transitions. For a pad, share what will sit on it and how it will be delivered. Review the concrete walkway replacement checklist for the details to gather.

New concrete patio slab beside a brick and siding home

Planning Concrete Removal and Replacement

When an existing driveway, patio, walkway, or slab is being replaced, the project scope should clearly identify the concrete being removed and the surrounding areas that will remain. Demolition access, material disposal, conditions uncovered beneath the old surface, and connections to nearby concrete can all affect the final plan.

We review transition points near steps, garage floors, foundations, walkways, and landscaping before work begins. New concrete may also differ from older adjoining surfaces in color or texture, so finish selections and appearance expectations should be discussed and documented as part of the estimate.

Can new concrete match an existing surface?

New and weathered concrete may differ in color, texture, aggregate exposure, and finish. When replacing only part of a surface, review the proposed joint locations and where old and new work will meet. If a consistent appearance is a priority, discuss the extent of replacement and finish expectations before selecting the scope.

Compacted base preparation for a residential concrete project

Preparation, Placement, and Finishing Matter

Concrete performance depends on more than the visible finish. Site preparation, the supporting base, forming, reinforcement when included, placement, joints, finishing, and curing all contribute to how the completed surface functions over time.

Weather and site conditions can affect scheduling and installation decisions. Our team reviews the project conditions and communicates the planned scope, finish expectations, and appropriate timing for access or use after placement.

When can I walk or drive on the new concrete?

Access timing depends on the concrete, weather, intended loads, and the installation plan. Arrange alternate parking or a temporary route before placement, then follow the project-specific instructions provided for the new surface. A universal reopening date is not a substitute for guidance for the actual installation conditions.

Large finished concrete patio beside a home and white privacy fence

A Clear Concrete Project Process

We begin by discussing the project goals and reviewing the work area, approximate dimensions, access, existing conditions, preferred finish, and any surfaces that connect to the proposed concrete. Superb coordinates the specialist partners involved in the agreed work and remains your point of contact. That shared review helps define the scope and identify details that require additional planning.

Before work begins, the estimate should identify removal, preparation, reinforcement, finish, cleanup, and applicable approval responsibilities included in the project. After placement and finishing, we review the completed work and communicate curing and use guidance for the new surface.

What should I send with a concrete estimate request?

Include approximate length and width, photos of the full work area, whether old concrete must be removed, the intended use, and the finish you are considering. Point out narrow gates, steep access, drainage concerns, nearby structures, and areas that must stay accessible. These details help identify what needs to be checked at the property.

Contact Us

Ready to Discuss Your Concrete Project?

Tell us what you want to build or replace and share the property address, project type, approximate dimensions, existing conditions, preferred finish, and photos when available. These details help our team prepare for the appropriate next step.

Request your concrete project estimate and tell us about the driveway, patio, walkway, slab, or replacement work you are considering.